CDBRG - SAFETY-SILV 60 SILVER BRAZING ALLOYS (CADMIUM-FREE)
- MSDS: CDBRG
- Manufacturer: J W HARRIS CO INC
- Product Name: SAFETY-SILV 60 SILVER BRAZING ALLOYS (CADMIUM-FREE)
- National Stock Number: 3439-00F052472
Product Identification
Product ID:SAFETY-SILV 60 SILVER BRAZING ALLOYS (CADMIUM-FREE)
MSDS Date:12/01/1995
FSC:3439
NIIN:00F052472
MSDS Number: CDBRG
Responsible Party
CINCINNATI, OH 45242-4110
US
Emergency Phone: 513-891-2000
Info Phone: 513-891-2000
Cage: FO309
Contractor
Telephone: 513-891-2000
Cage: 27911
Ingredients
COPPER (DUST & MIST), BRONZE POWDER *96-4*
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: 25%
OSHA PEL 0.1 MG(CU)/M3 (FUME)
ACGIH TLV: 0.2 MG/M3 (FUME)
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ZINC OXIDE *96-4*
CAS: 1314-13-2
RTECS: ZH4810000
Fraction By Weight: 15%
OSHA PEL 5 MG/CUM
ACGIH TLV: 5 MG/CUM FUME
SILVER *96-4*
CAS: 7440-22-4
RTECS: VW3500000
Fraction By Weight: 60%
OSHA PEL 0.01 MG/CUM
ACGIH TLV: 0.1 MG/CUM
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:COPPER & ZINC FUME MAY CAUSE METAL
FUME FEVER. SHORT TERM: IRRITATION OF THE THROAT. LONG TERM:
PULMONARY IRRITATION/PNEUMOCONIOSIS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, COUGHING, SHORTNESS OF BREATH,
NAUSEA, FEVER, BODY ACHE, CHILLS, METALLIC TASTE, DRYNESS.
Medical Cond Aggravated by Exposure:IMPAIRED PULMONARY
FUNCTIONS/ILLNESS.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE CPR IF NEEDED. OBTAIN
MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:NONFLAMMABLE
Fire Fighting Procedures:THESE PRODUCTS ARE SHIPPED AS NONHAZARDOUS,
NONFLAMMABLE, NONEXPLOSIVE & NONREACTIVE SOLID MATERIALS.
Unusual Fire/Explosion Hazard:OPEN FLAME & SPARKS CAN IGNITE
COMBUSTIBLES.
Handling
Handling and Storage Precautions:DON'T TOUCH LIVE ELECTRICAL PARTS.
TRAIN EMPLOYEE TO KEEP THEIR HEAD OUT OF THE FUMES.
Other Precautions:COMPOSITION/QUANTITY OF FUMES & GASES ARE DEPENDENT
UPON METAL BEING BRAZED, PROCESS, PROCEDURE & FILLER METALS USED,
COATING ON BASE METAL BEING BRAZED, NUMBER OF OPERATORS & VOLUME IN
WORK AREA, QUA LITY & AMOUNT OF VENTILATION, (SEE SUPP)
Exposure Controls
Respiratory Protection:USE RESPIRABLE FUME RESPIRATOR/AIR SUPPLIED
RESPSIRATOR WHEN BRAZING IN CONFINED SPACE/WHERE LOCAL
EXHAUSTS/VENTILATION DOESN'T KEEP EXPOSURE
& GASES
Eye Protection:SAFEETY GLASSES, GOGGLES
Other Protective Equipment:FACE SHIELD W/FILTER LENS OF APPROPRIATE
SHADE NUMBER, ARM PROTECTORS, APRONS, HATS, SHOULDER PROTECTION,
DARK CLOTHING
Supplemental Safety and Health
OTHER PRECAUTIONS CONT'D: POSITION OF OPERATOR'S HEAD W/RESPECT TO FUME
PLUME, PRESENCE OF CONTAMINANTS IN ATMOSPHERE.
Chemical Properties
Appearance and Odor:SOLID MATERIALS.
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:BRAZING FUMES & GASES.
Disposal
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.